Users may occasionally experience no light output when using laser cutting machines. When such a situation occurs, the first step is to check the entire laser cutting machine and troubleshoot it. You can follow the following steps to check the operation.
1. Check the focusing focal length of the laser cutting machine to see if there is any deviation or change, and then check if the focusing mirror is clean. Strictly check if the optical path is offset, and carefully adjust the optical path.
2. Check if the reflector is contaminated or damaged, clean or replace the reflector lens.
3. Check if the water is circulating normally. Secondly, check if the water quality or temperature of the cooling water is normal.
4. Check if the laser power supply is powered on. If it is not powered on, consider whether the laser power supply is damaged and replace it.
If the laser cutting machine fails to produce light, do not panic. Just carefully inspect the equipment according to the steps to find the cause and repair it in a timely manner.